Easy Soap Recipe Using Goat’s Milk: A Step-By-Step Guide

Many people seek out goat milk soap for its luxurious lather and beneficial effects on the skin. Capric-caprylic triglyceride, which forms a barrier on the skin to help prevent moisture loss, makes goat milk particularly nourishing. In addition, goat milk has lactic acid, which is thought to help with skin smoothness, and vitamins A, D, and B6.

Goat milk soap is a great choice for dry skin or eczema. It makes an excellent facial soap because it’s gentle and conditioned, but you can also use it on the rest of your body. By following this easy soap recipe using goat’s milk, you can quickly produce soap that you can use and probably sell it.

Freeze The Milk First

First, using fresh goat’s milk will almost certainly make your soap a rich honey colour. Thus, using it with any pigments is not recommended. It also frequently has a potent smell, which thankfully disappears in the finished soap. It happens because adding lye to milk causes it to heat up so quickly (often to over 150°F) that it can burn, giving the milk a darker colour.

Additionally, it tends to cause your soap to curdle, which is never good! You must first freeze the milk before adding the lye to prevent these problems. To ensure it is completely frozen before using it, pour it into an ice cube tray the night before. Your soap will be lighter the colder the milk is.

Gather Your Ingredients And Supplies

Before you start, assembling all of your supplies and soap ingredients is crucial. Ensure your workspace is tidy and free of clutter on a counter or table, and arrange all your supplies to be accessible. Ensure you will not be interrupted briefly by friends, family, kids, pets, or the phone. Put on your safety gear, including chemical splash goggles, gloves, long sleeves to protect your arms, and an apron to protect your clothes. It’s time to activate the lye once your supplies and ingredients are ready.

Make Your Oils Melt And Add Lye Solution

You will need to melt the oils first, which is done by placing them in a pot and heating them until they reach 120 degrees Fahrenheit. Once they have melted, add the lye to your oils while stirring constantly. We recommend using an immersion blender after adding the lye so that it dissolves as quickly as possible without burning anyone or anything due to splashing.

Blend The Oil And Lye Solution Until Thin Trace

Mixing should take no longer than five minutes; once you’ve reached trace (a thick, creamy consistency), remove your soap from heat immediately. If your soap does not reach a thin trace, it is possible to add sodium lactate or glycerin to help speed up the process. If you don’t have either of these ingredients on hand, you can wait a few more hours before mixing again.

You may need more time to achieve a trace if you are blending the ingredients with a stick blender. If you have been mixing for more than 15 minutes without reaching a trace, it is recommended that you stop and wait before attempting the process again.

Add Fragrance

When the mixture has reached the thin trace stage, it is time to add the fragrance oil. However, this is optional; some soapmakers choose not to use fragrance oil and instead rely on the aromas naturally produced by their products’ ingredients.

Use a scale to measure your ingredients so that they are all uniform; this will make it easier to control how much scent is added. Once you’ve added your fragrance oil and stirred well (or used an immersion blender), pour the soap into moulds or cake pans as desired.

Pour The Soap Mixture Into The Mould

At this point, you should have a thin, homogeneous mixture ready to be poured into your soap mould. If you don’t have moulds, you can use any shallow container that quickly removes the soap (such as an old baking pan). You’ll want to ensure plenty of ventilation when pouring the soap mixture into your container, so it doesn’t bubble over or cause a mess.

Keep The Soap In A Cool Place

After you have poured the soap into the container, you need to let it sit undisturbed for at least 24 hours so that it can harden. You can speed this up by storing the soap in an excellent location, preventing the soap from becoming dangerously hot during this period. You can temporarily accelerate solidification by placing the mould you use, such as an old baking pan, in the freezer.

Take The Soap Out Of The Mould

Once your soap has hardened, please remove it from the mould. If you’re using an old baking pan, flip it over onto a plate or flat surface and pop out each bar with a knife or some other kitchen utensil for this task. If you’re using other moulds for your soap, instructions on removing them are usually included with your purchase.

Within twenty-four hours, soap is typically ready to be used. If you cannot wait 48 hours before using your soap, doing so will not cause any damage; however, you may only receive some of the benefits of allowing soap to sit for two days.

Conclusion

Soap made from goat’s milk is an all-around excellent and all-natural product that anyone can use. It is simple to assemble as long as you have the proper materials. The result can assist you in achieving and maintaining healthy skin since it can be used as a general body cleanser or as an exfoliant to remove dead skin cells.

Indeed, soap-making can be an incredibly easy, fun, and rewarding hobby. We hope today’s post has given you all the information you need to start your soapy journey using goat’s milk! Remember, nothing stops you from innovating and creating new things with soap making. You could use different fats or oils, try new fragrances, or experiment with the basic recipe design. Soap making is genuinely creative and experimental, so go ahead and have fun doing it!